GP-PRO Gel Scooter Battery / Motorcycle Battery 12 V 9 Ah GTZ10S Maintenance-Free Sealed Precharged Similar to YTZ10S / TTZ10S / FA114

This GP-PRO gel battery with 12 V and 9 Ah is a ready-to-install starter battery for scooters and motorcycles. The 9 Ah capacity provides noticeable energy reserves in everyday use and can replace equivalent batteries with lower capacity, provided dimensions (Length: 150 mm, Width: 87 mm, Height: 93 mm), terminal arrangement (Positive terminal left), and connector type match. This offers more reserve capacity for starting after standstill periods and for consumers in the onboard network without any changes needed on the vehicle.

Product Features:

• Gel starter battery 12 V
• Capacity 9 Ah
• Positive terminal left
• Length: 150 mm, Width: 87 mm, Height: 93 mm
• Maintenance-free due to sealed design
• Sealed and leak-proof because the acid is bound in the gel
• Reduced self-discharge, resulting in longer shelf life and less capacity loss during standstill periods
• Increased starting power thanks to gel technology
• Precharged and delivered ready for installation

For vehicle use, the gel design means a leak-proof, sealed battery that loses less capacity during longer seasonal standstills. The higher capacity can provide more reserve for starting operations after standstills when replacing an identical battery with lower Ah ratings, as long as the form factor remains identical.

Technical Details:

• Voltage: 12 V
• Capacity: 9 Ah
• Cold cranking current (EN): 190 A
• Terminal arrangement: Positive terminal left
• Battery type: Gel battery
• Condition on delivery: sealed and fully charged
• Application: starter battery for scooters and motorcycles
• Dimensions: Length 150 mm, Width 87 mm, Height 93 mm

The combination of 9 Ah and high cold cranking current supports a stable starting performance, even if the vehicle was stationary for a long period or started in low temperatures. The reduced self-discharge of gel technology counteracts the typical capacity loss during standstills.

Vehicle and Model Compatibility:

• Similar type designation: YTZ10S
• Equivalent designations: TTZ10S, BTZ10S, ETZ10-BS, FA114, FTZ10S-BS, GEL12-10B-4, LTZ10S, LTZ10S-BS, MBTZ10S, SLA12-10Z-S, 509 01, BGTZ10-S, NTZ10S-BS, YTZ10S-4, YTZ10S-BS, 50922, 508901015, M6011, TTZ10S-BS, WPZ10S-BS, YTZ10-BS
• Compatible with the following series and manufacturers:
  • Honda: ADV 350, CB 1000 R / RA, CB 400 SF, CB 500 F, CB 500 X, CB 600 FA Hornet and more
  • MV Agusta: Brutale 1000, Brutale 1078 RR, Brutale 1090 / RR, Brutale 675, Brutale 750 / S, Brutale 800 and more
  • Yamaha: FZ 8 / Fazer 8, FZ 8 Fazer S / SA, FZ 8 N / NA, FZ-09, FZ8 800 NA, MT-07 and more
  • Kawasaki: EN 650 S Vulcan, Eliminator 500 R, Ninja 1000 H2, Ninja 1000 H2R, Ninja 500 R, Ninja 500 SE and more
  • KTM: Duke 690 / R, Duke II 640, Enduro 690 / R, LC4 640 Adventure R, LC4 640 Enduro, LC4 640 SM and more
  • SYM (Sanyang): ADX 125, CityCom 300i, Jet 5 125, Jet X 125 ie, Maxsym 500, Maxsym TL 508 ABS and more
  • Aprilia: RSV 1000 Tuono V4 R / APRC, RSV4 1000, RSV4 1000 R / Factory, RSV4 1000 R Factory / APRC, RSV4 1000 RR / RF, RSV4 1100 Factory and more
  • Suzuki: AN 400 Burgman, AN A Burgman, GSX-R 1000, GSX-S 1000, LT 500 R / Quadracer, LT-R 450 Quadracer
  • BMW: G 650 X Challenge, G 650 X Country, G 650 X Moto, HP 4, S 1000 RR
  • Kymco: Dink 125, Dink 150, People S 200
  • Triumph: Scrambler 1200, Speed Twin 1200, Thruxton 1200 EFI / R
  • Gas Gas: ES 700, SM 700
  • Husqvarna: 701 Enduro, 701 Supermoto
  • Peugeot: Django 125
  • Rieju: Tango 250
  • Voge: DSX 650
• Installation is possible if the following points match:
  • Voltage 12 V
  • Dimensions 150 mm x 87 mm x 93 mm
  • Terminal arrangement Positive terminal left
  • Connector type suitable for vehicle wiring

If these features are identical, the 9 Ah version can also be used when previously an identical battery with lower capacity was installed. The practical effect is more reserve capacity for starting operations and more stable supply of the onboard network during standstills without requiring vehicle adjustment.

Installation and Application Notes:

• Before installation, compare dimensions and terminal arrangement with the existing battery
• Positive terminal left must fit cable routing and terminal clamp assignment on the vehicle
• Battery is delivered sealed and precharged and is ready for installation
• For longer winter standstill, remove the battery and store dry and warm
• Recharge only with a suitable charger for sealed motorcycle and scooter batteries, since charging current must be low for sealed batteries

The sealed gel design ensures operation is predictable even during typical scooter/motorcycle standstill times; however, the correct charging process is crucial when recharging is necessary. Correct terminal arrangement prevents reverse polarity and facilitates voltage-free installation.

Note on Checking Before Purchase:

• Please compare dimensions 150 mm x 87 mm x 93 mm as well as terminal arrangement Positive terminal left with the existing battery before purchase. A trouble-free replacement is only possible with matching form factor and connection situation.

Gel Batteries: Care & Instructions

Gel batteries are maintenance-free and specially designed for use in motorcycles, motor scooters, and light two-wheelers.

To preserve their lifespan and performance, deep discharge should definitely be avoided as it can permanently damage gel batteries. During longer standstill periods, regular recharging with a charger suitable for gel batteries is recommended since excessive charging voltage can damage the gel structure.

The battery should always be securely mounted, kept clean and dry to avoid vibrations, contact problems, and leakage currents. A sufficient charge state is especially important in cold seasons as gel batteries also lose performance at low temperatures.

About the Manufacturer GP-PRO

As a manufacturer of two-wheeler batteries, GP-PRO develops its products based on the latest gel technology.

This design enables uniform power delivery, high operational safety, and maintenance-free use. Development focuses on practical factors such as starting behavior, stability during standstill, and long-term electrical stability.

Thus, GP-PRO stands for thoughtful battery technology with a clear focus on reliability and everyday suitability.

Note on Battery Disposal

Old batteries must not be disposed of in household waste. End-users are legally obliged to return batteries to a suitable collection point. Starter batteries can be returned free of charge to municipal collection points or retailers who carry starter batteries. The symbol of the crossed-out dustbin indicates this obligation.

Shipping of old batteries via regular parcel services is generally not possible due to hazardous goods regulations. Alternatively, old batteries can be disposed of free of charge at municipal recycling centers or in specialist shops.

Meaning of Battery Symbols

Batteries are marked with the symbol of a crossed-out waste bin. This symbol indicates that batteries must not be disposed of in household waste.

For batteries containing more than 0.0005 mass percent mercury, more than 0.002 mass percent cadmium, or more than 0.004 mass percent lead, the chemical designation of each hazardous substance is displayed below the waste bin symbol - "Cd" stands for cadmium, "Pb" stands for lead, and "Hg" for mercury.