Tuning Carburetor / Carburetor Kit Malossi Dellorto PHBL 25 mm BD
for Piaggio Gilera 125 - 180 ccm 2 Stroke / Runner / Hexagon
Tuning Carburetor / Carburetor Kit Malossi Dellorto PHBL 25 mm BD
for Piaggio Gilera 125 - 180 ccm 2 Stroke / Runner / Hexagon
- Description
- Fitting
Description
Malossi Carburetor Kit with Dellorto PHBL 25 mm (BD) – your upgrade for Piaggio/Gilera Maxi-2T
The Dellorto PHBL 25 is the perfect entry-level tuning carburetor for the large Maxi two-strokes from the Piaggio group. Thanks to its compact design, you can – in combination with a slightly shortened original intake rubber – in many cases even run it with the original airbox. Solid Dellorto technology and easy tuning and maintainability make the kit a true all-rounder: regardless of whether it is a tourer or a more heavily tuned engine.
Another plus point: With the 25mm carburetor, you can do without the often poorly functioning original e-choke, which is not infrequently responsible for unnecessarily high fuel consumption. A manual choke is therefore included in the Malossi carburetor kit.
Why a larger carburetor?
- Significantly better cylinder filling for engines that have already had slight power increases
- Strong increase in torque even from lower RPMs
- Even more power possible through modification of the air filter box (Malossi includes a insert tube; you can obtain further tubes from us)
- Compatible with Dellorto standard nozzles: 6 mm main jets and 5 mm idle jets
Technical Details & Jetting
- Carburetor: Dellorto PHBL
- Bore: 25 mm
- Version: BD
- Adjustment screws: on the right in the direction of travel
- With oil & vacuum connection
- Jetting (pre-tuning):
- Main jet: 82
- Idle jet: 45
Important: Malossi carburetor kits are pre-tuned, nevertheless we strongly recommend a fine-tuning (main/idle jet and individual areas), because every engine runs differently depending on the setup and components.
Practical Installation Tips
- It is best to order the matching intake manifold at the same time – we are happy to advise you.
- Note: The original oil hoses to the carburetor have often hardened after many years and are difficult to slide onto the new carburetor. We therefore recommend installing a new oil hose (from the oil pump to the carburetor) directly. Item 723837 is suitable for this.
Compatibility (Excerpt)
Fits many vehicles, such as Piaggio Hexagon, Gilera Runner and Piaggio Typhoon (each 2-stroke) – but also other models from the list below.
- Aprilia: SR 150 2001
- Aprilia: SR 125 2-stroke
- Gilera: Typhoon 125
- Gilera: Runner 180 FXR 2-stroke
- Gilera: Runner 125 FX 2-stroke
- Gilera: Runner 125 SP 2-stroke
- Gilera: Runner 180 SP 2-stroke
- Italjet: Dragster 180 2-stroke
- Italjet: Dragster 125 2-stroke
- Piaggio: TPH 125 2-stroke
- Piaggio: Hexagon LX 125 2-stroke
- Piaggio: Skipper LX 125 2-stroke
- Piaggio: Hexagon 150 2-stroke
- Piaggio: Hexagon 125 2-stroke
- Piaggio: Skipper LXT 150 2-stroke
- Piaggio: Hexagon LXT 180 2-stroke
- Piaggio: Typhoon 125 2-stroke 1997
- Piaggio: Skipper 150 SKR
- Piaggio: Typhoon 125 X XR 1998
- Piaggio: Skipper 125 SKR
- Piaggio: TPH 125 1998
OEM Number (for comparison purposes)
- OEM No.: 1611033
Technical data
Global | |
|---|---|
| Item number |
M1611033
|
| Manufacturer number | 1611033 |
| Manufacturer | Malossi |
| Net weight | 650 g |
| Reference OE/OEM Number | 1611033 |
| Type | Carburetor |
Carburetor | |
| Carburetor diameter | 25 |
Engine | |
| Carburetor diameter in mm | 25 |
Ratings
5
4
3
2
1
Loading reviews...
Delete review
Downloads
Product safety information
Information about the manufacturer
| Product | Tuning Carburetor / Carburetor Kit Malossi Dellorto PHBL 25 mm BD for Piaggio Gilera 125 - 180 ccm 2 Stroke / Runner / Hexagon |
| Manufacturer |
Malossi S.p.a. |
| Responsible person |
Malossi S.p.a. Via Roma 118/I 40012 Calderara di Reno Italy |