The motoscope pro is the latest digital dashboard generation from motogadget. The instrument has an ABE and does not need to be registered. Cutting edge technology makes an ultra-flat housing design possible.

734 LEDs, controlled by a 16-bit RISC processor, form the almost full-surface self-illuminating display matrix. It ensures optimal readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. The engine speed is displayed in a freely scalable manner via an analog LED strip with a drag pointer function. The main and secondary displays are self-configurable. Another display area shows the engaged gear.

Four indicator lights are already integrated and can be used for far more input signals with the help of the display indicator. For the connection wiring of the indicator lights and/or the measuring inputs, the Breakout Box A or B is additionally required. See the 'Breakout Boxes' tab above. The motoscope pro has a complete CAN-bus interface and is thus prepared for many future developments of Plug 'n Ride solutions. See e.g. Breakout Box Triumph.

The dashboard communicates via its own digital single-wire bus (m-BUS) with additional breakout boxes, which simply expand the functional spectrum. Thus, the dashboard is extremely versatile and can be adapted to very many vehicles and applications.

The aluminum housing is milled from solid material, anodized, and can be easily attached via two rear threaded bushings.

Technical data and functions:
Length/Width/Depth: 109 mm/ 47 mm/ 11 mm
Weight with cable: approx. 100 g
Fastening: 2 x M3 threaded bushing
Current consumption during operation: max. 200 mA (depending on load)
Current consumption in sleep mode: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20° +80°C
Tachometer (LED strip) = 0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer = 0 – 350 km/h or mph
Daily trip counter A & B = up to 999.9 km or mi
Total mileage (adjustable) = up to 250000 km or mi
Operating hour counter/service = 0 – 9999.5 h
Clock = 23:59 h/min
Trip time display = 0 – 99:59:59 h/min/s
Tachometer (on LCD) = 0 – 20000 rpm
Adjustable engine speed warning (shift light) = 0 – 20000 rpm
On-board voltage display = 9 – 18 V
Undervoltage warning = Warning if below approx. 11V
Time measurement = 0 - 100 km/h or 0 - 60 mph 0.00 – 30.59 sec.
Instantaneous acceleration = +/- 0.00 – 1.50 G
Average speed = 0 – 350 km/h or mph
Maximum speed value = 0 – 350 km/h or mph
Maximum engine speed value = 0 – 20000 rpm
Max. positive acceleration = +1.50 G
Max. negative acceleration = - 1.50 G
Gear indicator = N, Gear 1 - 6
Green indicator LED (with Breakout Box A/B) = Neutral (N)
Green indicator LED (with Breakout Box A/B) = Turn signals left, right
Blue indicator LED (with Breakout Box A/B) = High beam
Red warning LED (with Breakout Box A/B) = various warning functions
Fuel/Reserve (with Breakout Box A/B) = 0 - 100% with Low warning
Air temperature* (with Breakout Box B) = -20 - 80 °C / -4 - 176 °F with High/Low warning
Water temperature* (with Breakout Box B) = 40 - 120 °C / 104 - 248 °F with High/Low warning
Oil temperature* (with Breakout Box B) = 40 - 150 °C / 104 - 302 °F with High/Low warning
Oil pressure* (with Breakout Box B) = 0.5 - 8 bar / 0 - 116 psi with High/Low warning

Scope of delivery:
motoscope pro with approx. 70 cm connection cable
Speed sensor M5 x 0.5 fine thread (stainless steel, IP67) with approx. 150 cm connection cable
2 magnets
10 x cable end connectors
flying fuse
2 stainless steel fastening screws
detailed installation and operating instructions.

Note:
- Touch sensor is no longer included.
- Please additionally order the Breakout Box for connecting indicator lights (see Breakout Box Std.) or to digital bus systems (Triumph, H-D). No Breakout Box is required for BMW R9T.