Cylinder kit Malossi MHR Testa Rossa 47.6mm
for Minarelli LC
Cylinder kit Malossi MHR Testa Rossa 47.6mm
for Minarelli LC
- Description
- Fitting
Description
Malossi MHR Testa Rossa 47.6 mm Cylinder Kit (70 ccm) for Minarelli LC – High End Racing with brutal torque
The Malossi MHR Testa Rossa Cylinder Kit 47.6 mm is an uncompromising 70ccm High End Racing cylinder for Minarelli LC (water cooling). As a further development of the MHR Team cylinder, the Testa Rossa comes with 7 transfer ports and a large, 2-part exhaust port – made for maximum performance with clean tuning.
Particularly exciting: In contrast to many other high-end racing cylinders, the Testa Rossa (Team II) runs with a Team exhaust system in a lower RPM range and delivers an extreme torque potential. The modular, two-part cylinder head additionally supports better heat dissipation. With appropriate tuning, power values over 20 hp are possible.
The kit is clearly designed for racing: The crankcase must be bored or milled so that the stub of the cylinder base can be inserted into the housing. Furthermore, the cylinder can only be operated with a crankshaft with a 12 mm piston pin to reliably absorb the enormous forces.
The gasket set contains a comprehensive assortment of cylinder base gaskets. This allows you to optimally influence the compression ratio. All parts required for assembly are included in the kit.
OEM no. for comparison purposes: 3115390
Features & Benefits
- High End Racing cylinder kit from Malossi (MHR Testa Rossa)
- Bore: 47.6 mm
- Displacement: 70 ccm
- 7 transfer ports for strong scavenging and performance
- Large 2-part exhaust port (split)
- Modular (two-part) cylinder head for improved heat dissipation
- Extreme torque potential – with Team exhaust system in the lower RPM range
- Over 20 hp possible (with corresponding tuning)
- Gasket set with many cylinder base gaskets for adjusting the compression ratio
- Assembly parts fully included
Important Installation Notes
- Modify crankcase: must be bored or milled (cylinder base stub is inserted into the housing)
- Only compatible with crankshafts for 12 mm piston pins
Compatibility (Minarelli LC / Water Cooled)
Fits many vehicles with Minarelli LC (water cooling), such as Yamaha Aerox 50, MBK Nitro 50 and Aprilia SR 50 LC – but also other models with the corresponding engine.
Vehicle List (Excerpt)
- Adly: 50 Her Chee
- Aprilia: Area 51 50, Rally 50 LC Water, Gulliver 50 LC Water, SR 50 LC Water 1994-1997, Sonic 50 LC Water, SR 50 Racing LC Water 2000
- Benelli: 491 RR 50 Minarelli engine 2003, 491 RR Replica 50 Minarelli engine 2003, 491 Sport 50 Minarelli engine 2003, K2 50 LC water
- Beta: Eikon 50, Ark 50 LC Water
- Italjet: Dragster 50
- KTM: Ark 50 LC Water
- MBK: Nitro Naked 50 2013, Nitro 50 1999, Mach G 50 LC Water, Nitro 50 Cat 2003
- Malaguti: F12 Phantom R 50 AC Air, F15 Firefox LC Water 2004, F12 Phantom 50 LC Water 2000-2004
- Yamaha: Aerox 50 1999, Aerox R 50 2013, Jog RR 50 LC Water, Aerox 50 Cat 2003, Aerox R 50 Naked 2013
Part Numbers
- Item number: M3115390
- OEM / Comparison number: 3115390
Technical data
Global | |
|---|---|
| Item number |
M3115390
|
| Manufacturer number | 3115390 |
| Manufacturer | Malossi |
| Net weight | 1500 g |
| Reference OE/OEM Number | 3115390 |
| Type | tuning |
Engine | |
| Cooling | Water-cooled |
| Piston pin in mm | 12 |
Ratings
5
4
3
2
1
Loading reviews...
Delete review
Downloads
Product safety information
Information about the manufacturer
| Product | Cylinder kit Malossi MHR Testa Rossa 47.6mm for Minarelli LC |
| Manufacturer |
Malossi S.p.a. |
| Responsible person |
Malossi S.p.a. Via Roma 118/I 40012 Calderara di Reno Italy |