Racing brake disc front wheel/rear wheel from Stage6

Stage6 is always looking for the optimization of products for road and racing use, and this applies, of course, to the brake sector as well.

When developing the 190mm Stage6 R/T Yamaha Aerox/MBK Nitro floating brake disc, the focus was on maximum reliability and maximum braking power, the result is a high-end brake disc that is clearly suitable for racing use, but can of course also be used in everyday use.

The brake disc is a plug-and-play upgrade for the original brake disc, no adapter is required. The disc can also be used on the rear wheel. To do this, the original wheel hub must be slightly removed in the area of the floaters (with a Dremel or similar).

The brake disc is 100% made in Italy and was tested under real conditions on the race track. It is made entirely of high-quality martensitic steel. This type of steel has a high carbon and chrome content, the main advantage is its high hardenability and hardness, which ensures an unsurpassed lifespan.

The heat treatment of the brake area is the same as that used on superbikes, so that racetrack riders in particular can brake consistently and powerfully throughout the race.

This model is floatingly mounted, which of course looks pretty great, but also has various advantages. With floating brake discs, the braking force is distributed around 30% more evenly than with normal discs, resulting in better brake response and more uniform wear on the brake pads. The brake disc is fitted with orange anodized 7075 T6 aluminum bearing rings, whose strength is comparable to steel, but weigh much less.

Here are the advantages of the Stage6 R/T floating-mounted brake disc:

• Plug & Play installation without adapter
• Increased and consistent braking performance even under extreme conditions
• Excellent heat distribution and limited expansion and warping at high temperatures
• Reduced brake pad wear
• Better handling and more grip when braking in corners
• For optimal performance, we recommend that you install a new pair of brake pads when installing the new Stage6 brake disc.

Technical data:

• external diameter 190 mm
• inner diameter 58.5 mm
• Diameter through mounting holes 80 mm
• 3 receiving holes
• Hole diameter 10.5 mm
• Disc thickness 4mm

For Yamaha Aerox/Jog/Malaguti F12/Aprilia SR50

Note: For brake discs with the dimensions 190 mm outside/58 mm inside with a 3-hole mount, there are 3 different versions, which differ in the screws used.- 10 mm flat head screws- 8 mm flat head screws- 8 mm countersunk screws. The disc was designed by Stage6 so that you can use it for all 3 versions. If you have a 10mm screw connection (Yamaha Aerox/MBK Nitro...), you can use the original screws and install the windshield plug and play. With the special screws provided, you can also mount the disc on all models with 8mm screws (Aprilia SR50, Piaggio NRG, Typhoon, Malaguti F12, F15, MBK Mach G, Yamaha Jog, etc.)