JMP Skan Monitor 2

Smartphone battery monitoring

When using lithium batteries, no precise statement can be made about the state of charge due to the flat discharge curve.

With the JMP Skan Monitor 2 and the new and free Apple or Android app “JMP BatteryMonitor II,” you are able to

Check the charge level of your battery quickly and easily. Only with a consistent,

The positive state of charge of the battery also ensures full capacity and usability.

The positive state of charge also prevents any premature damage or failure of the battery.

As a result of continuous recording, the charge status of the battery is recorded while driving and can also be called up later.

The file with the data can be sent by email from a smartphone and displayed in Excel.

This allows you to quickly see where the charging voltage dropped or was too high. This makes it easy to recognize a faulty controller.

In addition, the new app can also be used to precisely check start processes (starter, cable connections, etc.) and charging processes (alternator, cable, etc.).

This saves lengthy troubleshooting in the event of a problem. Depending on the settings in the app options, a notification may warn the driver if the battery level is low or if there are other problems.

After simply connecting the battery using ring rings and downloading the new Android or Apple app, the current voltage value can be retrieved.

The transmitter can be used for 12 V batteries. The range is approx. 10 meters. The connection is via Bluetooth. (Only from Bluetooth 4.0; e.g. from iPhone 4s, iPad 3 or iPod Touch 5)

The JMP Skan Monitor 2 is ideal for detecting an alternator surge of >14.9 V, for example, before the battery is damaged.

Please note: The new JMP Skan Monitor 2 requires the new JMP BatteryMonitor II” app!

If the voltage falls below the minimum voltage, it is indicated that the battery will be recharged soon. - Easy attachment to the battery using ring rings - Power consumption only approx. 2 mA - Reverse polarity does not damage the transmitter or battery - Download a free app from the Apple App Store or Google Play Store under JMP Battery Monitor II - Voltage recording even during Drive. Result can be sent by email. The file can be viewed in Excel.