The motoscope mini with ABE is an extremely small, digital motorcycle instrument. The LED display specially developed for this purpose is unique in the instrument sector. 251 ultra-bright LEDs form a nearly borderless, excellently readable display area that can be used completely for representing the display values. Only this innovative, complex technology enables a maximum display area with simultaneously minimal housing dimensions.

Due to its very simple, elegant design and high-quality feel, the motoscope mini fits almost any two-, three- or four-wheeler. It can support styling in an exposed position or be integrated inconspicuously and 'cleanly' - the mini makes everything possible!

The housing:
The high-quality aluminum housing is milled from solid material and its surface is black anodized. The high-gloss polished variant has its own appeal. The electronics are completely potted in the housing and are thus immune to weather, water, dust and vibration.

Display and functions:
The innovative dot matrix of 251 ultra-bright LEDs represents the engine speed via a scalable, horizontal light strip and all other functions as numerical values that are easy to grasp. The engine speed can also be called up as a numerical value at the press of a button. To achieve optimal readability in darkness, sun and twilight, the brightness of the LEDs is automatically adjusted. For the limit range of the permissible engine speed ('red zone') or as a shift light function, an engine speed value can be entered, upon exceeding which all LEDs light up pulsing simultaneously.

The highlight: the display of the motoscope mini can display the numerical values not only from left to right, but also from top to bottom. Therefore, the instrument can also be mounted vertically!

Operation:
The displays are switched using the supplied menu button or, for example, the high-beam flasher button on the handlebar. The standard display on the screen is the speed value. Other measured values can be brought to the display if required by a short press of the button. Optionally, it can be set so that the display automatically returns to the speed value after a short time or that a specific display is permanently set. Presettings or stored values naturally remain saved even without a power supply.

Mounting:
Due to the very small dimensions, the motoscope mini is easy to attach almost anywhere on any vehicle. Standing alone on the triple clamp or on the handlebar, in existing instrument panels or recessed into the tank or GRP - the instrument can be integrated everywhere.

Connection and sensors:
The simple wiring as well as detailed mounting and operating instructions make the connection of the instrument possible even for users who have not previously dealt with vehicle electronics. The supplied stainless steel speedometer sensor is very small (M5/25 mm). With the 1.5 m long connection cable, it can be easily attached to the front or rear wheel. Vehicles with original mechanical speedometer drives can also be easily converted. The motoscope mini is compatible with many original speedometer sensors (reed contacts and proximity sensors) from vehicle manufacturers. In this case, only connections are linked and the mechanical installation of a sensor becomes unnecessary. An intelligent 'Teach function' enables simple calibration of the speedometer - even for vehicles with sensors on the gearbox.

Technical data and functions:
Length/Width/Depth: 59 mm/21.5 mm/13 mm
Weight: approx. 32 g
Fastening: 2 x M3 threaded socket
Current consumption during operation: approx. 100 mA
Operating voltage: 7 V - 18 V
Operating temperature: -20° +80°C
Tachometer (LED bar) = 0 – 6/ 8/ 10/ 14/ 16 krpm
Tachometer (numerical) = 0 – 20 krpm
Limit range setting/shift light = 0 – 20,000 rpm
Speedometer = 0 – 999 km/h or mph
Daily trip meter = 0 – 999.99 km or mi
Total kilometers (adjustable) = up to 99,999 km or mi
Travel time display = 0 – 99:59 h/min

Scope of delivery:
Instrument with approx. 75 cm connection cable
Mini button
flying fuses
6 cable end connectors
Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
2 strong neodymium mini-magnets
2 fastening screws M3 with washer
detailed installation and operating instructions.