HIGHSIDER CAN-BUS resistor CBW1
HIGHSIDER CAN-BUS resistor CBW1
- Description
- Fitting
Description
HIGHSIDER CAN-BUS resistor CBW1 with DIP switch.
Our newly developed HIGHSIDER CAN-BUS resistor CBW1 fits most vehicles that have a CAN-BUS system.
The CBW1 resistor provides a required electrical load for your vehicle which, with the correct setting of the dip switches, ensures that no error message is displayed in the cockpit when using aftermarket turn signals.
Additionally, fail-safe operation is guaranteed. This means:
In the event of a failure of the aftermarket turn signals due to an electronic defect, an error message is immediately displayed in the cockpit.
Up to 2 channels can be operated, such as the rear left turn signal and the rear right turn signal.
If 2 pairs of turn signals (FL, FR, RL, RR) are replaced, 2 x CBW1 are required.
Which requirements must be met for the use of the CBW1 on the vehicle:
Either:
LED turn signals were installed in the original state on the vehicle.
Or:
The vehicle has a CAN-BUS system.
If none of the requirements are met, the CBW1 cannot be installed (!), in which case we recommend the following resistors for the vehicle:
For turn signals with 21 watts
6.8 Ohm part number 207-025
or
10 Ohm part number 207-028
For turn signals with 10 watts
27 Ohm part number 207-020
The following resistance values can be set:
150 Ohm
170 Ohm
200 Ohm
240 Ohm
300 Ohm
400 Ohm
600 Ohm
1200 Ohm
Dimensions:
Height = 11 mm
Width = 31 mm (without tabs)
Width = 46 mm (with tabs)
Length = 40 mm
Cable length = 200 mm with pins
Connections:
Yellow = Input Channel 1 (+)
Orange = Output Channel 1 (+)
Blue = Input Channel 2 (+)
Red = Output Channel 2 (+)
Grey = Input Ground (-)
Black = Output Ground (-)
Scope of delivery: 1 piece
Notes:
Up to 2 channels can be operated.
The connection is explained in detail in the operating instructions!
Technical data
Global | |
|---|---|
| Item number |
HS-207-033
|
| Manufacturer number | 207-033 |
| Manufacturer | Highsider |
| Net weight | 52 g |
| Type | Resistor |
Ratings
5
4
3
2
1
Loading reviews...
Delete review
Product safety information
Information about the manufacturer
| Product | HIGHSIDER CAN-BUS resistor CBW1 |
| Manufacturer |
Paaschburg & Wunderlich GmbH |
| Responsible person |
Paaschburg & Wunderlich GmbH Am alten Lokschuppen 10 A 21509 Glinde Germany |