GP-PRO Battery Terminal Grease Corrosion Protection Paste 50 ml for Battery Terminals and Contacts

The GP-PRO Battery Terminal Grease serves to protect battery terminals, contacts, clamps, and screw connections from corrosion. It is suitable for use on two-wheeled vehicles as well as other vehicles with battery connections. The paste is designed for lasting protection under various environmental conditions.

Product Features:

• Corrosion protection for battery terminals, contacts, clamps, and screw connections
• Protection against battery acid
• Saltwater resistant
• Suitable for plastic and aluminum
• Pasty consistency
• Practically insoluble in water
• Color white
• Contents 50 ml

The combination of acid protection and saltwater resistance ensures that sensitive contact points remain permanently protected from oxidation. This stabilizes the electrical contact resistance, which positively impacts the operational safety and lifespan of the battery connections.

Technical Details:

• Freezing point according to DIN ISO 2207: +54 °C
• Flash point according to DIN ISO 2592: 215 °C
• Explosion limits: lower 0.6 vol.%, upper 6.5 vol.%
• Vapor pressure at 20 °C: maximum 0.1 mbar
• Density at 70 °C according to DIN 51757: 0.830 g/ml
• Solubility in water at 20 °C: practically insoluble
• Viscosity at 100 °C according to DIN 51562: 7.0 mm²/s
• Thermal decomposition: starts at 360 °C

The specified characteristics show that the grease remains stable even under increased thermal stress and does not leak. The low water solubility supports lasting corrosion protection even in humidity or splashing water.

Vehicle and Model Compatibility:

• The grease is universally applicable and not vehicle-specific. It is suitable for motorcycles, scooters, quads, ATVs, and other vehicles with battery connections where metallic contacts need to be protected from corrosion.

Installation and Application Instructions:

• Before application, surfaces to be treated must be thoroughly cleaned and degreased.
• Then, a thin, even layer of grease is applied to the battery terminals or contact points.
• Excess material should be avoided.

A thin application layer is sufficient to reliably seal the contact surfaces. This supports a permanently stable electrical contact and helps reduce maintenance-related contact issues.

Note for Pre-Purchase Testing:

• Before use, ensure that the product is suitable for the intended application and does not conflict with any manufacturer-specific requirements.