101_Octane Exhaust Aluminum for GY6 50 ccm compatible with hardware store and Chinese scooters with factory aluminum exhaust system and two rear shock absorbers

The 101_Octane exhaust is an aluminum exhaust system for GY6 50 ccm scooters that are delivered from the factory with two rear shock absorbers and a special exhaust bracket on the right side of the engine. The system is fastened with two clamps to this vehicle-side bracket - the lower mounting point of the second rear shock absorber is usually also attached to the same bracket. For this reason, the system is exclusively suitable for vehicles that were already delivered from the factory with this configuration. An exhaust manifold gasket is not included in the scope of delivery and must be ordered separately.

Product features:

• Exhaust system for GY6 50 ccm
• Material Aluminum
• Fastening with 2 clamps to vehicle-side exhaust bracket
• Exclusively for vehicles with factory aluminum exhaust configuration and two rear shock absorbers
• Exhaust manifold gasket not included - order separately

The combination of the exhaust bracket and the lower shock absorber mounting point on the same mount is structurally vehicle-specific - retrofitting on vehicles without this factory equipment is not possible. Before purchasing, it is mandatory to check whether the vehicle was delivered from the factory with two rear shock absorbers and the corresponding exhaust bracket.

Technical details:

• Product category Exhaust
• Material Aluminum
• Engine type GY6 50 ccm
• Fastening 2 clamps to exhaust bracket right engine side
• Exhaust manifold gasket not included
• Manufacturer 101_Octane

Vehicle and model compatibility:

• The exhaust is designed for GY6 50 ccm scooters that were delivered from the factory with two rear shock absorbers and an aluminum exhaust system - including models from ATU / Explorer, Baotian, Benzhou, Flex Tech, Generic, Huatian, IVA, Jmstar, Jonway, Kreidler, Nova Motors, Peugeot (Tweet, Kisbee), Qingqi, REX, Sachs, Znen, Zongshen and other manufacturers with the GY6 engine platform. The factory vehicle configuration with two rear shock absorbers and a matching exhaust bracket is exclusively decisive for compatibility. The complete model assignment can be found in the separate vehicle list.

Assembly and application notes:

• The system is fastened with two clamps to the vehicle-side exhaust bracket on the right side of the engine. An exhaust manifold gasket must be obtained and installed separately before installation. After assembly, all clamp connections must be checked for tightness as well as the exhaust system for leaks.

Note on checking before purchase:

• Before purchasing, check whether the vehicle was delivered from the factory with two rear shock absorbers and an aluminum exhaust system - only then is this system compatible.