GP-PRO Gel Motorcycle Battery 12 V 19 Ah GB16L-B maintenance-free sealed pre-charged similar to YB16L-B / YB16HL-A-CX / FA137

The GP-PRO Gel battery 12 V 19 Ah GB16L-B is a maintenance-free starter battery for motorcycles with increased starting current requirements. It is delivered sealed and pre-charged and can be installed without further preparation. The GEL technology used is designed for leak-proof operation and low self-discharge.

Product features:

• Gel starter battery 12 V
• Capacity 19 Ah
• Positive terminal right
• Length: 176 mm, Width: 100 mm, Height: 157 mm
• Gel battery with battery acid bound by special silica gel
• Absolutely maintenance-free design without refilling
• Sealed and leak-proof design
• Reduced self-discharge when installed
• Suitable for longer periods of inactivity within the season
• Increased starting power
• Directly ready for installation due to pre-charged delivery state

The bound battery acid prevents the leakage of electrolyte and ensures stable operation even during longer periods of inactivity. The closed and maintenance-free design reduces maintenance effort and supports a reliable starting function, provided the electrical design of the vehicle matches the battery.

Technical details:

• Nominal voltage: 12 V
• Capacity: 19 Ah
• Cold cranking amps according to EN: 240 A
• Dimensions: Length 176 mm, Width 100 mm, Height 157 mm
• Terminal layout: Positive terminal right
• Battery technology: GEL
• Delivery state: sealed and pre-charged

The technical data show that this battery is designed for motorcycles with higher electrical starting requirements. Capacity and cold cranking amps provide a sufficient starting reserve, while dimensions and terminal layout only fit if the battery compartment, holder, and cable connections are designed for this construction form.

Vehicle and model compatibility:

• Similar type designation: YB16L-B
• Comparison designations: YB16HL-A-CX, 51911S, BB16L-B, EB16L-B, FA137, GEL12-16L-B, LB16L-B, 6D4P, 12-16L-B, 51911, 519011019A514, CB16L-B, FB16-L-B, GM16Z-3B, M4F43, SYB16L-B
• The range of application includes the following models from Kawasaki:
  • Kawasaki GPZ 1100 of the early 1980s
  • Kawasaki GPZ 1100 Unitrack of various production years
  • Kawasaki GPZ 1100 ZX1100E1
  • Kawasaki Z 1000 ST of the late 1970s and early 1980s

The battery is frequently used as a replacement for construction forms similar to YB16L-B. Prerequisites for compatibility are identical dimensions, the terminal layout positive terminal right, as well as the battery fastening and electrical design specified by the vehicle manufacturer.

Installation and application notes:

• The battery is delivered fully charged and can be installed directly.
• If the motorcycle is not used for a longer period during winter, the battery should be removed and stored in a dry and warm room.
• Occasional recharging with a suitable charger for motorcycle batteries is necessary, as closed gel batteries may only accept very low charging currents.

This procedure contributes to operational safety and the preservation of capacity, as gel batteries react sensitively to deep discharge and unsuitable charging currents.

Note on inspection before purchase:

• Before purchase, dimensions (Length: 176 mm, Width: 100 mm, Height: 157 mm), terminal layout (positive terminal right), as well as the voltage and capacity required by the vehicle must be checked. Additionally, it must be ensured that the battery compartment, holder, and connection cables fit the intended construction form.

Gel Batteries: Care & Notes

GEL batteries are maintenance-free and specifically designed for use in motorcycles, scooters, and light two-wheelers.

To maintain their service life and performance, deep discharge must be absolutely avoided, as this can permanently damage GEL batteries. During longer periods of inactivity, regular recharging with a charger suitable for GEL batteries is recommended, as a charging voltage that is too high can damage the gel structure.

The battery should always be firmly mounted and kept clean and dry to avoid vibrations, contact problems, and leakage currents. A sufficient state of charge is particularly important in the cold season, as GEL batteries also lose performance at low temperatures.

About the manufacturer GP-PRO

As a manufacturer of two-wheeler batteries, GP-PRO develops its products based on the latest GEL technology.

This design enables uniform power output, high operational safety, and maintenance-free use. In development, practical factors such as starting behavior, stability during inactivity, and long-term electrical stability are the focus.

Thus, GP-PRO stands for sophisticated battery technology with a clear focus on reliability and everyday suitability.

Note on Battery Disposal

Old batteries must not be disposed of in household waste. End-users are legally obliged to return batteries to a suitable collection point. Starter batteries can be returned free of charge to municipal collection points or retailers who carry starter batteries. The symbol of the crossed-out dustbin indicates this obligation.

Shipping of old batteries via regular parcel services is generally not possible due to hazardous goods regulations. Alternatively, old batteries can be disposed of free of charge at municipal recycling centers or in specialist shops.

Meaning of battery symbols

Batteries are marked with the symbol of a crossed-out dustbin. This symbol indicates that batteries must not be placed in household waste.

For batteries containing more than 0.0005 mass percent mercury, more than 0.002 mass percent cadmium, or more than 0.004 mass percent lead, the chemical designation of the respective pollutant used is located under the dustbin symbol - where "Cd" stands for cadmium, "Pb" stands for lead, and "Hg" for mercury.